433MHz 4-Key Copy Clone Remote for Garage Doors & Gates

433MHz Copy Clone Wireless Remote – 4-Key RF Transmitter for Garage Doors & Gates

Duplicate your existing remote in seconds with this compact 433MHz copy clone wireless RF transmitter. Featuring 4 programmable buttons and a fixed-code encoding method, it works with electric garage doors, telescopic gates, road barriers, alarm systems, and more. The slim plastic casing (60 × 36 × 12 mm) fits comfortably in your pocket or on a keychain, and batteries are included for instant use right out of the box.

Key Features

• One-step copying: Simply hold the matching button on your original remote and this transmitter simultaneously — the LED flashes to confirm a successful clone in moments.
• Wide chip compatibility: Works with PT2262, PT2240, PT2264, PT2260, PT2242, SC2262, SC2260, EV1527, P527, HT600, HT640, HT12D, HT12F, HT12E, SC5262, and more.
• Long wireless range: Reliable transmission up to 150 metres for convenient operation from a distance.
• 4 independent buttons: Copy up to 4 different commands onto a single remote — ideal for multiple doors or access points.
• Easy memory clear: Reset all stored codes with a simple two-button sequence (LED flashes 3 times to confirm).
• Versatile use: Compatible with electric telescopic doors, garage doors, road gate controllers, and alarm remote systems.
• Battery included: Powered by 2 × CR2016 (3V) batteries — included in the package, so you're ready to go immediately.
• Multi-pack options: Available in quantities of 1 to 10 — ideal for households, rental properties, or fleet garages needing multiple spares.

Specifications

How to Copy a Remote

1. Hold the button on your original remote and the corresponding button on this transmitter at the same time.
2. The LED will flash twice quickly, then three times slowly, then remain lit — copying is complete.
3. Repeat for each of the remaining 3 buttons as needed.

How to Clear All Codes

1. Press the top two buttons simultaneously until the LED flashes 3 times.
2. Release the right button only, keeping the left held.
3. Press the right button three consecutive times — the LED will flash, then go out when any button is pressed, confirming a full memory clear.

Package Contents

• 1 × 433MHz Copy Clone Remote Control Transmitter (per unit ordered)
• 2 × CR2016 batteries (included)

Note: Colours may vary slightly from photos due to lighting and screen settings. Minor dimensional differences may occur due to manual measurement.

Related Products You May Also Like

• 10-Pack Rubber Strain Relief Cord Boot Protectors 4.6–6mm
• 10-Pack Waterproof Cable Glands PG7 PG9 Nylon Connectors
• 25-in-1 Precision Magnetic Screwdriver Set | Pro Repair Kit

Learn more: OSHA guidance on hand and power tools

Frequently Asked Questions

Q: Will this 433MHz copy clone remote work with my existing garage door opener?

A: This transmitter is compatible with most fixed-code 433MHz receivers that use common chips such as PT2262, EV1527, HT12E, SC2262, and many others. It is designed for electric garage doors, telescopic gates, road barriers, and alarm systems. We recommend checking your existing remote's chip or frequency before purchasing to ensure compatibility.

Q: How many codes can I store on this remote?

A: This 4-key wireless remote can store up to 4 separate copied codes — one per button. This makes it convenient for controlling multiple doors or access points from a single transmitter.

Q: Does the remote come with batteries?

A: Yes — each unit includes 2 × CR2016 (3V) batteries pre-installed or included in the package, so you can begin copying and using your remote straight away without any additional purchases.

Q: What is the wireless transmission range of this RF remote?

A: The remote has a wireless transmission range of up to 150 metres under open-air conditions, providing reliable operation for large driveways, car parks, and gated properties.