Desoldering Braid Solder Wick 2.0mm 2.5mm 3M | PCB Repair
Desoldering Braid Solder Wick 2.0mm 2.5mm 3M | PCB Repair
Desoldering Braid Solder Wick Wire | 2.0mm & 2.5mm | 3 Metres
Make PCB rework and electronics repair faster and cleaner with this high-efficiency desoldering braid. Engineered from tinned copper mesh, it draws up excess solder quickly, leaving pads clean and ready for re-work — all while keeping heat exposure to a minimum to protect delicate components.
Key Features
- Fast Solder Absorption: Precision-woven braid maximises surface tension for rapid, thorough solder uptake.
- Low Flux Residue: Leaves minimal residue on pads, reducing post-repair cleaning time.
- Protects PCB Pads: Efficient wicking action reduces the time heat is applied, helping to protect sensitive solder pads.
- Oxidation & Corrosion Resistant: Tin coating provides excellent thermal conductivity and long-term durability.
- Two Widths Available: Choose 2.0 mm for fine-pitch components or 2.5 mm for general-purpose desoldering.
- Generous 3-Metre Length: Plenty of braid for multiple repair sessions before needing a replacement.
Specifications
| Width Options | 2.0 mm / 2.5 mm |
| Length | 3 metres (approx. 9.8 ft) |
| Material | Tin-coated copper braid |
| Weight | 15 g |
| Country of Origin | Made in Mainland China |
Package Contents
- 1 × Desoldering Braid Solder Wick Wire (2.0 mm or 2.5 mm, 3 m)
Related Products You May Need
- 25-in-1 Precision Magnetic Screwdriver Set | Pro Repair Kit
- 34-Compartment Double-Sided Hardware Storage Box & Dividers
Learn more: OSHA on personal protective equipment
Frequently Asked Questions
Q: What is desoldering braid and how does it work?
A: Desoldering braid (also called solder wick) is a fine mesh of tinned copper strands. When pressed against a solder joint with a hot soldering iron, capillary action draws the molten solder up into the braid, cleanly removing it from the PCB pad. This 2.0 mm / 2.5 mm braid is ideal for through-hole and surface-mount component removal.
Q: Which width should I choose — 2.0 mm or 2.5 mm?
A: The 2.0 mm width is best for fine-pitch SMD components and smaller pads where precision is needed, while the 2.5 mm width suits standard through-hole joints and general PCB repair work. When in doubt, the 2.5 mm braid covers more area and is the most popular choice for everyday electronics desoldering.
Q: How do I use this desoldering braid properly?
A: Place the tip of the braid flat over the solder joint, then press your soldering iron onto the braid (not the board). As the solder melts, it wicks into the braid. Move to a fresh section of braid for each joint and avoid reusing a saturated section, as this can transfer solder back onto the pad.
Q: Is this braid compatible with lead-free solder?
A: Yes. The tin-coated copper mesh works effectively with both traditional leaded solder and modern lead-free alloys. Slightly higher iron temperatures (around 350–370 °C) may be needed for lead-free solder to ensure efficient wicking.