POROMETISTO DSF01 6-in-1 Stud Finder Wall Scanner

POROMETISTO DSF01 6-in-1 Stud Finder Wall Scanner | LCD

$97.50 $120.18

POROMETISTO DSF01 6-in-1 Stud Finder & Wall Scanner

Take the guesswork out of drilling and hanging with the POROMETISTO DSF01 6-in-1 Electronic Stud Finder. This professional-grade wall scanner locates wood studs, ferrous and non-ferrous metals, and live AC wires hidden behind drywall, plywood, ceilings, and floors — helping you work with confidence every time.

Key Features

6-in-1 Multi-Mode Detection: Accurately locates ferrous metals, non-ferrous metals (e.g. copper), wood studs, and live AC wires (110V/220V) in walls, ceilings, and floors.
Dual Wood Stud Modes: Switch between Exact Mode (up to 20mm / 0.79 in) and Deep Mode (up to 38mm / 1.50 in) for flexible use on drywall, plywood, bare wood floors, and coated walls.
Auto & Manual Calibration: Lifts off the surface to auto-calibrate, or press the measurement key for on-demand manual calibration — ensuring consistent, reliable readings every scan.
Precision Indicator System: Three-stage LED indicator lights guide you from approach to pinpoint accuracy, paired with an audible beep alarm so you never miss a target.
Large LCD Display: Easy-to-read screen shows scan mode, detection depth, signal strength, battery level, center-point marker, and inch/cm unit conversion — all at a glance.
Ergonomic Design: Comfortable multi-angle grip with a non-slip rubber back that protects your wall surface during scanning.
Wide Application: Ideal for mounting TVs, installing shelves, hanging cabinets, garage storage, and any home improvement project that requires knowing what's inside your walls.
Auto Power-Off: Shuts down automatically after approximately 5 minutes of inactivity to conserve battery life.

Technical Specifications

Maximum Scanning Depth — Ferrous Metals	≤120mm / 4.72 in
Maximum Scanning Depth — Non-Ferrous Metals (Copper)	≤100mm / 3.94 in
Maximum Scanning Depth — Live AC Wires	≤50mm / 1.97 in
Maximum Scanning Depth — Wood Studs (Exact Mode)	≤20mm / 0.79 in
Maximum Scanning Depth — Wood Studs (Deep Mode)	≤38mm / 1.50 in
Display	LCD with signal strength, depth, mode & battery
Calibration	Auto & Manual
Unit Conversion	Inch / cm
Power Source	1 × 9V Battery (not included)
Operating Temperature	-10°C to 50°C / 14°F to 122°F
Storage Temperature	-20°C to 70°C / -4°F to 158°F
Operating Humidity	35–55% RH
Auto Shutdown	After ~5 minutes of inactivity
Country of Origin	Made in Mainland China

In the Box

1 × DSF01 Stud Finder Wall Scanner
1 × User Manual

Note: 9V battery is not included.

Frequently Asked Questions

Q: What materials can the POROMETISTO DSF01 stud finder detect?

A: The DSF01 6-in-1 wall scanner detects ferrous metals (e.g. iron, steel), non-ferrous metals (e.g. copper pipes), wood studs, and live AC wires (both 110V 60Hz and 220V 50Hz systems). It is suitable for use on drywall, plywood, bare wood floors, and coated wood walls.

Q: Does the DSF01 stud finder come with a battery?

A: No, the DSF01 stud finder requires one standard 9V battery (not included). The LCD display includes a battery level indicator so you always know when it's time for a replacement.

Q: What is the difference between Exact Mode and Deep Mode for wood stud detection?

A: Exact Mode provides precise center-point detection of wood studs up to 20mm (0.79 in) deep — ideal for standard drywall. Deep Mode extends detection up to 38mm (1.50 in), making it the better choice for thicker walls, plywood sheathing, or coated surfaces.

Q: How do I calibrate the DSF01 wall scanner?

A: The DSF01 features both automatic and manual calibration. It calibrates automatically when lifted away from the surface. For manual calibration, simply press the measurement key while the device is held flat against the wall. Always calibrate on a clear area of wall away from studs or wires for best accuracy.